RBB755

Visualisation and treatment of defects, clear defect display, storage of sequencial errors, statistic evaluation.

UV70-W

Core or coreless up to Ø 800 mm, printable label.
“In line” arrangement with eightfold changer at the entry point.
2-way take off with good/bad selectioning.

The UV70-W is designed for the make-up of medium-weight belts into large rolls with diametersof up to 800 mm. The machine is used primarily forvehicle safety belts. The rolls can be wound from the start of the belt, either with or without a cardboard core. The end of the belt is fixed with an adhesivelabel. Faulty rolls (marked defects) are sorted out, while fault-free rolls are loaded onto a transport wagon in a standing position. A large range of special features is available.

SWT-800

Horizontal winding unit
Coreless winding up to Ø 800 mm, Strapping unit, palletising unit.

The SWT 800 is designed for the coreless winding of medium and heavy belts into large rolls. The belts are rolled horizontally on a flat winding plate. Fully automatic belt intake takes place via a linear axis and a gripper system. Belt feeding for each new roll and removal for subsequent processing when finished, occur in a single, time-saving operational phase. Manual handling of the heavy rolls is not required. As an option, the system can be supplemented with a fully automatic hooping and palletising device.

SGA-M

Length cutting unit [hot/ultrasonic cut]
Cuts from 250 mm to 4,500 mm with stacking table.
Marking equipment for production identification.
Form cutting [round corners] and plating [with hot cut].

SGA-M and SGA-US automatic cutting to length machines are specially designed for the make-up of vehicle safety belts. The machines meet the stringent demands made by the automotive subsupplier sector with regard to product characteristics and process safety. Due to their modular design, the machines offer versatile applications. Belts are marked with production identification, cut to length and stakked. Rounded ends are created during cutting to length by means of form cutting. Previously marked defects in the belts are automatically cut out and removed.

SGA-US

Cuts from 200 mm to 2,000 mm with destacking.
Marking equipment for production identification.
Repeat recognition, form cut [round corners].