Skip to main content

Confection of Technical Textiles

Confection of seat belts

For automotive and aviation industry.

RBB755

Visualisation and treatment of defects, clear defect display, storage of sequencial errors, statistic evaluation.

UV70-W

Core or coreless up to Ø 800 mm, printable label.
“In line” arrangement with eightfold changer at the entry point.
2-way take off with good/bad selectioning.

The UV70-W is designed for the make-up of medium-weight belts into large rolls with diametersof up to 800 mm. The machine is used primarily forvehicle safety belts. The rolls can be wound from the start of the belt, either with or without a cardboard core. The end of the belt is fixed with an adhesivelabel. Faulty rolls (marked defects) are sorted out, while fault-free rolls are loaded onto a transport wagon in a standing position. A large range of special features is available.

SWT-800

Horizontal winding unit
Coreless winding up to Ø 800 mm, Strapping unit, palletising unit.

The SWT 800 is designed for the coreless winding of medium and heavy belts into large rolls. The belts are rolled horizontally on a flat winding plate. Fully automatic belt intake takes place via a linear axis and a gripper system. Belt feeding for each new roll and removal for subsequent processing when finished, occur in a single, time-saving operational phase. Manual handling of the heavy rolls is not required. As an option, the system can be supplemented with a fully automatic hooping and palletising device.

SGA-M

Length cutting unit [hot/ultrasonic cut]
Cuts from 250 mm to 4,500 mm with stacking table.
Marking equipment for production identification.
Form cutting [round corners] and plating [with hot cut].

SGA-M and SGA-US automatic cutting to length machines are specially designed for the make-up of vehicle safety belts. The machines meet the stringent demands made by the automotive subsupplier sector with regard to product characteristics and process safety. Due to their modular design, the machines offer versatile applications. Belts are marked with production identification, cut to length and stakked. Rounded ends are created during cutting to length by means of form cutting. Previously marked defects in the belts are automatically cut out and removed.

SGA-US

Cuts from 200 mm to 2,000 mm with destacking.
Marking equipment for production identification.
Repeat recognition, form cut [round corners].

Chain spools with a flange diameter of max. 400mm and a spool width of max. 715 mm

MERKMALE

[Translate to English:]

  • Grundmaschine in stabiler, schwingungsfreier Konstruktion
  • Antriebskopf un Gegenlager zur spindellosen Aufnahme des Teilbaumes doer der Zettelspule
  • Starke Elektromagnet-Bremes für kurzen Bremsweg
  • Fadenkreuz-Einlegevorrichtung
  • Kettfadenverlegung einstellbar von 0-30mm
  • Schutztüre als Unfallschutz
  • Meterzähler mit Vorwahl sowie Endschalter zum Stoppen bei vollem Wickel
  • Kompett Verdrahtung nach IEC-Norm

VORTEILE

[Translate to English:]

  • einfache Handhabung
  • geringer Platzbedarf
  • Flexibiliät im Einsatz
  • Präsziser Wickelaufbau
  • Hohe Betriebssicherheit

OPTIONEN

[Translate to English:]

  • Ausgleichwalzen, negativ angetrieben zur Kompensation der Facenspannung mittel Magnetbremse, für Schnellstop bei Fadenbruch
  • Spindel zur Aufnahme von 2 Zettelspulen
  • Halterung für 2 Expansionskämme nebeneinander mit anabhängiger Verstellung
  • Anitstatikgerät mit 2 eingebauten Ionisierstäben
  • Fernsteuerung beidseitig des Konengatters
  • Standardbäume und Konengatter
DOWNLOADS RB755
Name Description Size
 RB715_725_755_8p_en.pdf EN 841.21 KB
DOWNLOADS UV70-W
Name Description Size
 UV70_W_de_61048_01_04.pdf DE 216.65 KB
 UV70_W_en_61048_01_04.pdf EN 215.67 KB
 UV70_W_es_61048_01_04.pdf ES 216.46 KB
 UV70_W_tr_61048_01_04.pdf TR 275.85 KB
 UV70_W_zh_61048_01_04.pdf CN 266.95 KB
DOWNLOADS SWT-800
Name Description Size
 SWT800_de_05_07.pdf DE 204.80 KB
 SWT800_en_05_07.pdf EN 204.45 KB
 SWT800_es_05_07.pdf ES 205.32 KB
 SWT800_tr_05_07.pdf TR 242.56 KB
 SWT800_zh_05_07.pdf CN 245.32 KB
DOWNLOADS SGA-M / SGA-US
Name Description Size
 SGAM_de_04_05.pdf DE 208.99 KB
 SGAM_en_04_05.pdf EN 208.42 KB
 SGAM_es_04_05.pdf ES 208.65 KB
 SGAM_tr_04_05.pdf TR 246.19 KB
 SGAM_zh_04_05.pdf CN 262.50 KB

Our product experts will be happy to help you!

Jakob Müller AG
Schulstrasse 14
CH 5070 Frick
Schweiz


You can reach us at:

 +41 62 8655 111

    Write Email