WARPING SYSTEMS
MW400

Warping machine for non-elastic yarns.

  • Basic machine in a stable, oscillation-free design
  • Drive head and thrust bearing for the spindle-free pick-up of the sectional beam or the warp bobbin
  • Strong electromagnetic brake for short braking distance
  • Lease insertion device
  • Adjustable warp thread laying from 0 – 30 mm
  • Accident protection door
  • Metre counter with preset and end switch for stopping during full winding
  • Cabling in line with IEC standard

 

  • Simple handling
  • Low space requirement
  • Flexible application
  • Precision winding
  • High operational safety

 

  • Negative driven equalisation rollers for compensation of thread tension using a magnet brake for a quick stop in the case of thread breakage
  • Spindle for the pick-up of two warp bobbins
  • Holder for 2 adjacent expansion combs with independent adjustment
  • Anti-static device with two integrated ionising rods
  • Remote control on both sides of the cone creel
  • Standard beams and cone creels
Warping Systems MW400 Warping Machine
Max. Flange diameter [mm] 400
Max. Beam length [mm] 715
Max. Warping speed [m/min.] 400
Downloads
MW400_en_04_20.pdf
EN 668.51 KB
MW400_de_04_20.pdf
DE 654.39 KB