SAM-250

WINDING AND MAKING-UP
SAM-250 – MEASURING AND WINDING MACHINE

Fully automatic, for elastic and non-elastic tapes, braids, cords, trimmings and lace.

  • Important: High productivity
  • Important: Application flexibility
  • Important: Low style change times
  • Important: Convenient operation
  • Important: Microprocessor controlled
  • Important: Winding parameter storage as data record
  • Important: Precise linear measurement
  • Important: Driven tape feeding device
  • Disentangeling device for non-elastic articles
  • Tape inspector “Censor”
  • Over tension shut off
  • Optical length measuring device
  • Mechanical tape brake
  • Tape loop generator
  • Motor driven adjustment tape guide
  • 2 quick change tape guides
  • Tape cutting and end fixing device
  • Traverse drive for bobbins (SAM250 RS)
  • Labeling device
  • Magazine for empty rolls and spools
  • Spool/roll unloading device
  • High winding performance of up to 400 m/min
  • If required, also combinable for bobbin, roll and cartridge bobbin winding
  • Can be used flexibly for a wide range of articles and formats
  • Easy to set and change with programmable and retrievable product parameters
  • Precise measurement of length, also with highly elastic articles
  • Perfect bobbin and roll formation thanks to constant fabric tension and precise guide elements
  • Lateral layering of spool with fixed tape guide for constant tension
  • Micro-processor control for constant, reproducible winding conditions
  • Driven unwinding unit
  • Independent feeder units
  • Integrated feeder device for elastic articles
  • Selectable longitudinal/cross labeling
  • Pinning device
  • Staple device for cords and ribbons
  • Electronically controlled brake for tape tension
  • Cellophaning device for rolls or spools
  • Paper strip under last tape layer
  • Paper strip under cellophane
  • Edge traversing device (SAM 250 R)
  • Quality selection device for rolls not corresponding to the programmed standards (quality assurance)
  • Magazine extension for cores/cartridge bobbins
  • Motor driven magazine change
  • Cartridge bobbin/spool separation in magazine
  • Vibration magazine for cores/cartridge bobbins
  • Hot cutting device
  • Antistatic unit
  • Flange labeling unit with or without thermo transfer printer
  • Integrated photooptical tape inspection
Winding and Making-Up SAM-250
Winding diameter bis 250 mm
Tape width for rolls 10–100 mm
Tape width for spools 0,5–25 mm
Downloads
sam_250_en_60994_05_05.pdf
EN 209.91 KB
sam_250_de_60994_05_05.pdf
DE 209.44 KB
sam_250_sp_60994_05_05_.pdf
ES 235.25 KB
sam_250_tr_60994_05_05.pdf
TR 251.59 KB
sam_250_zh_60994_05_05.pdf
CN 418.92 KB